Insert CSS here or remove
A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5E cables. A single Hub supplies signal and power to a maximum of eight Mixers. That’s one for you and everybody in the band. If that’s not enough, the Hubs can be daisy-chained using the HearBus In and Out for virtually unlimited system size. The Hear Back Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs.
The ADAT input can come from digital audio workstations, digital recorders, or digital mixers. For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet.
The Hear Back system is available in a Four Pack as well as offering Mixers and Hubs separately. The Hear Back Four Pack includes 4 Mixers, 1 Hub, 4 - 50 foot CAT5e cables, and a Hear Back analog DA-88 style cable.
The Hear Back Mixer is equipped to mount to any standard mic or desk stand using the built-in 5/8" threaded socket located on the back of the mixer.
|Mixer Aux Input|
|Line Input Configuration / Impedance:||Stereo, unbalanced, 10 Kohms typical|
|Line Input Level:||+4 dBu optimal, +22 dBu max|
|Mixer Headphone Power (Per Channel)|
|Load Impedance:||THD less than 0.01%*||THD less than 0.1%|
|8 Ohms:||150 mW*||230 mW|
|*THD AT 8 Ohms = 0.015% typical|
|16 Ohms:||235 mW||500 mW|
|25 Ohms:||675 mW||775 mW|
|32 Ohms:||950 mW||1.1 W|
|50 Ohms:||1.6 W||1.8 W|
|100 Ohms:||1.14 W||1.25 W|
|200 Ohms:||500 mW||650 mW|
|600 Ohms:||215 mW||220 mW|
|IMD:||Typically Less than 0.03%||Mixer Line Output|
|Freq Response:||20 Hz to 20 KHz, +0.04 dB, -0.55 dB|
|THD+N:||0.008% typical at 1 KHz, +15 dBu,|
|0.02% typical, 20 Hz – 20 KHz, +4 dBu|
|IMD:||0.02% typical at +4 dBu, 60 Hz/7 KHz|
|Crosstalk:||Better than -85 dB @ 1 KHz|
|Latency:||Less than 1.5 mSec, Hub input to mixer output using 500' of cable||System Noise Performance|
|Noise, A-Weighted:||-91 dBu @ analog, -97 dBu optical|
|Dynamic Range:||112 dB typical||System I/O|
|Hub Line In, Analog:||8 Balanced inputs on DB-25 female (Tascam DA-88 pinout)|
|Hub Max Input Level, Analog:||+15 dBu|
|Hub Light Pipe In:||Industry standard fiber optic connector, shuttered|
|Hub HearBus In, Out:||8-pin RJ45 jack (2 each)|
|Mixer Headphone Out:||TRS 1/4" unbalanced stereo (2 each)|
|Mixer Line Out:||TRS 1/4" balanced (2 each)|
|Mixer Max Output Level, Analog:||+24 dBu (mixed output)|
|Mixer Aux Input:||TRS 1/8" unbalanced stereo||Physical, Mixer|
|Size:||5.1" H x 9.3” W x 2.519" D (12.95 cm H x 23.62 cm W x 6.40 cm D)|
|Unit Weight:||15.8 oz. (0.45 kg)|
|Mounting:||Standard mic stand (5/8" 27 threads per inch) or desk mounted||Physical, Hub|
|Size:||11.5" (29.2 cm) H x 5.2" (13.2 cm) W x 3.6" (9.15 cm) D|
|Unit Weight:||5.0 lb.|
|Mounting:||Standard rack mount, 1 RU|
Note: 0 dBu = 0.775 Vrms. Specifications and features subject to change without notice.
If you need help from our highly skilled Tech Support, the easiest and quickest way to get your solution is by phone. Hear Technologies is committed to providing you the industry's best customer service.Max Sulkowski
For more information please see our Support page.